- 中文
- English
- Español
How Are Fancy Cut Loose Diamonds
2023-02-22 16:20:14
Click：
“
Common fancy cut diamonds include pear, marquise, oval, heart, emerald, baguette
”
Common fancy cut diamonds include pear, marquise, oval, heart, emerald, baguette, cushion, Asscher, and princess.
Compared with round diamonds, fancy cut loose diamonds have higher processing requirements and cutting costs, lower relative brightness and brightness, and uneven brightness and fire. The most important thing about cutting fancy cut loose diamonds is to save weight. Round diamonds are cut with a large weight loss, so almost all large diamonds are cut into various irregular-shaped loose diamonds to obtain the maximum weight.
On the other hand, a fancy cut is more conducive to showing the color of the diamond, especially when the color is not strong enough. At the same time, cutting and grinding special-shaped diamonds is also to make better use of diamond raw materials and pursue better performance and beauty.
-
Single-Crystal vs Polycrystalline CVD Diamond: Process Difference Lies in Growth Logic, Not Equipment
The process difference between single crystal and polycrystalline CVD diamond lies not in equipment, but in growth logic. Single crystal and polycrystalline CVD diamond are two functional new materials with completely independent growth mechanisms, lattice structures and performance systems. Their process logic, product features and application boundaries diverge fundamentally from the very start of deposition and growth. Comparing or selecting materials without considering their underlying crys
-
From Lab-Grown Diamonds to Industrial Diamonds: Is It Time to Build an MPCVD Factory?
The lab-grown diamond industry is entering a new stage. Over the these few years, lab-grown diamonds have gradually gained wider acceptance in the jewelry market. With the development of production technology, equipment maturity and supply chain improvement, the industry is becoming more standardized and efficient. But beyond jewelry, another opportunity is attracting more attention:Industrial diamond applications.
-
Diamond‑Copper Composite: A Next‑Generation Solution for High‑Power Electronics Thermal Management
Diamond‑copper composite (DC) is an advanced metal‑matrix composite material consisting of diamond particles as the reinforcement phase and copper as the matrix, fabricated through state‑of‑the‑art composite preparation techniques. Diamond has the highest thermal conductivity of any naturally occurring material, with isotropic values ranging from 1200 to 2300 W/m·K. Copper, with a thermal conductivity of 401 W/m·K, ranks second only to silver among common metals. By combining the two, the compo
-
Mosaic Single‑Crystal Diamond: Breaking Size Limits
With an ultra‑wide bandgap of 5.47 eV, ultra‑high thermal conductivity (>2000 W/m·K), high carrier mobility (electron mobility up to 4500 cm²·V⁻¹·s⁻¹), and ultra‑high theoretical breakdown field strength (>10 MV/cm), Single‑Crystal Diamond (SCD) is an ideal candidate for next‑generation high‑power, high‑frequency and extreme‑environment electronic devices. However, both natural diamond and HPHT‑synthesized single‑crystal diamond are limited in lateral size, which greatly hinders large‑scal
